Gemo Master Shrink
SKU: GM24MS02LQ
€9.20Price
GEMO Promo Deal
GEMO UV Liquid Putty can save you time-just a few seconds and your model is ready to be sanded and painted.
- Easy to sand with #400 sandpaper
- Easy to cut with utility knife
- Can be applied with a minimum thickness of 0.1~1cm
- No oil after curing
- Low heat of curing
- Fills any joint
Istructions
- 1. First fill the crack or hole with liquid putty.
- 2. Its liquid composition immediately fills any hole or joint space
- 3. If the purpose is just to fill evenly, it is recommended to use alcohol to smooth the putty, thus saving a lot of sanding time.
- 4. Before applying the liquid, it is necessary to make sure that there is no dust on the plastic surface (it is recommended to sand the parts to increase adhesion).
- 5. When using the UV flashlight, make sure it is at 1 cm. If the range is large, irradiate it locally to ensure that the UV light can penetrate all the way to the bottom so that it cures completely and solidifies.
- 6. After curing, don't rush to sand, but wait for the temperature to drop, you can blow it to cool it down, do a finger test, if cold it is ready for sanding.
Caution:
Do not shine the UV light directly into the eye.
The putty is not edible
